CJRW, SFRW, ZFRW Series Roll Vacuum Coating Machine

Date:2016-01-16 13:31:07　Hits:3653

Operational principle

Resistance heating evaporation roll vacuum coating machine;Induction heating evaporation roll vacuum coating machine;E beam evaporation roll vacuum coating machine;Magnetron sputtering roll vacuum coating machine etc.
The e beam evaporation roll vacuum coating machine is used for a large amount of evaporation and high melting point material, such as Si02.The production efficiency for the magnetron sputtering roll vacuum coating machine is low,but with a wide range for coating to adapt and have the advantages of the adherent cell membrane layer.

Applications

1. CJRW series is mainly used in flexible circuit boards, ITO transparent conductive film, film capacitors, car film, thin film solar cells, flexible solar cells and so on. Using magnetron sputtering technology, with DC, IF or RF magnetron sputtering system for coating the metal film, conductive film, total film, dielectric film, etc.
2. SFRW series applies to use in PET, PVC, PI, CPP coated surface of a transparent film such as high resistance packaging film, security film, Symphony film, optical film, a dielectric film using the electron beam evaporation technology,
3. ZFRW series is mainly used in printing and packaging film, wrapping paper, metallic yarn, capacitor film, functional films and so on. The machine is used by advanced high frequency induction evaporation or continuous wire feed evaporation technology, and the whole process is automatically controlled.

Features

technical parameter

Model	CJRW series	SFRW series	ZFRW series
The main application	ITO film, solar control film, flexible circuit board function, low emissivity film, thin film solar cells, etc	Anti-counterfeiting film, color film, high resistance packaging film, all kinds of optical film, etc	Gold and silver thread, capacitance film, paper, printing, packaging film, etc
The main application	PET/CPP/BOPP/PVC/PC/PA/PI	PET/CPP/BOPP/PVC/PC	PET/CPP/BOPP/PVC
Effective width of coating	1200mm	1100mm	2000mm
The largest diameter	Φ900mm	Φ900mm	Φ900mm
Maximum wind speed	5—20m/min	100—400m/min	500m/min
Commonly used coating speed	1—15m/min	10—300m/min	60—400m/min
Coating roller temperature	-15—25℃	-15—25℃	-15—25℃
Coating way	Magnetron sputtering	Electron beam evaporation	The resistance of evaporation
Coating auxiliary ion source	The low temperature ion assist device	The low temperature ion assist device	The low temperature ion assist device
Cryogenic system	TH-145-10P	TH-145-10P	TH-145-10P
Control mode	Industrial computer automatic control	Industrial computer automatic control	Industrial computer automatic control
Pumping rate	5X10-3Pa<15min	5X10-3Pa<15min	5X10-3Pa<15min
Ultimate vacuum	5.0X10-4Pa	5.0X10-4Pa	5.0X10-4Pa
Remarks	Above equipment parameters for your reference only, specific according to customers' special requirement of practical process design

Previous:CJ Series Magnetron Sputtering Vacuum Coating Machine

Next:HLW, CJW, SFW Series Vacuum Coating Continuous Production Line (Horizontal Type)